Garmin Fishfinder 100 BLUE Owner's Manual

Also see for Fishfinder 100 Blue: Specifications

29Unit OperationSetup Menu: Memory TabMemory TabThe ‘Mem’ tab contains the settings for unit memory and allows you toreset the unit to the factory settings and review the software version. Toaccess the ‘Memory’ tab, use the arrow keys to highlight it.RememberThe Fishfi nder 100 Blue can be set to remember it’s settings each timeyou power it on. You can set it to remember the settings in the SetupMenu (‘Setup Only’) or the unit’s settings in both the Setup Menu and theAdjustment Bar (‘All’).To select a Memory Setting:1. Highlight the ‘Mem’ tab on the Setup Menu.2. Highlight the ‘Remember’ field and press ENTER.3. Choose ‘All’ or ‘Setup Only,’ then press ENTER to accept the selection.Factory SetupTo restore the Factory Settings:1. Highlight the ‘Mem’ tab on the Setup Menu.2. Highlight the ‘Factory’ Setup button and press ENTER.3. Choose ‘OK’ to reset the unit or ‘Cancel’ to abort.Software VersionThe ‘Software Version’ Button will report information about the currentsoftware version in the unit and display the Unit ID Number.To activate the Software Version Window:1. Highlight the ‘Mem’ tab on the Setup Menu.2. Highlight the ‘Software Version’ button and press ENTER.3. Press ENTER to close the information window.Remember SelectionsSoftware Version InformationRestoreFactory Settings