28Unit OperationSetup Menu: Units TabUnits TabThe ‘Units’ tab contains settings for ‘Depth,’ ‘Temperature’ and ‘Speed.’To access the ‘Units’ tab, use the arrow keys to highlight it.DepthThe ‘Depth’ field can be confi gured to display in Feet (ft), Meters (m)or Fathoms (fa).To select a Depth Unit:1. Highlight the ‘Units’ tab on the Setup Menu.2. Highlight the ‘Depth’ field and press ENTER.3. Select ‘Feet,’ ‘Meters’ or ‘Fathoms,’ then press ENTER to accept thenew setting.TemperatureIf equipped with a temperature –capable transducer or a separatetemperature sensor, the unit can display water temperature in Fahrenheit(°F) or Celsius (°C).To Select a Temperature Unit:1. Highlight the ‘Units’ tab on the Setup Menu.2. Highlight the ‘Temperature’ fi eld and press ENTER.3. Select ‘Fahrenheit’ or ‘Celsius,’ then press ENTER to accept the setting.SpeedIf equipped with a speed sensor, the unit can display the boat’s ‘Speed’Over Water. The unit can be configured to display ‘Miles-Per-Hour’ (mh),‘Kilometers-Per-Hour’ (kh), or ‘Nautical Miles-Per-Hour’ (kt).To select a Speed Unit:1 Highlight the ‘Units’ tab on the Setup Menu.2. Highlight the ‘Speed’ field and press ENTER.3. Select ‘Miles/hr,’ ‘Kilom/hr’ or ‘Knots,’ then press ENTER to accept thenew setting.Depth SelectionsSpeed SelectionsTemperatureSelectionswww.reelschematic.comwww.reelschematic.com