Garmin Forerunner 910XT Owner's Manual

Also see for Forerunner 910XT: Quick start manual Quick Release Mount Instructions

Garmin Forerunner 910XT Owner's Manual Manual pdf 24 page image

22 ANT+ SensorsPairing Your ANT+ SensorsBefore you can pair, you must put onthe heart rate monitor or install thesensor. See the quick start manual or theaccessory instructions.If your Forerunner does not show datafrom the accessory, you may need to pairthe accessory to your Forerunner. Pairingis the connecting of ANT+™ wirelesssensors, for example, connecting your footpod with a Forerunner. After you pair thefirst time, your Forerunner automaticallyrecognizes your foot pod each time it isactivated.• Make sure the ANT+ sensor iscompatible with your Forerunner.• Bring the Forerunner within 3 m of theANT+ sensor.• Stay 10 m away from other ANT+sensors while pairing.• If is off, select MODE > Settings >run Settings > Heart rate > ANT+Hr > Yes > restart Scan.• If is off, select MODE > Settings> run Settings > Foot Pod > Yes >restart Scan.• If is off, select MODE > Settings> Bike Settings > bike name > ANT+Spd/Cad > Yes > restart Scan.• If is off, select MODE > Settings> Bike Settings > bike name >ANT+Power > Yes > restart Scan.• If you still cannot pair the accessory,replace the accessory battery (seepage 44 or accessory instructions).When the accessory is paired, a messageappears, and the accessory icon (page 5)appears solid on the screen.Heart rate MonitorNOTE: The Forerunner cannot recordheart rate data while swimming.Putting on the Heart rate MonitorNOTE: If you do not have a heart ratemonitor, you can skip this task.Wear the heart rate monitor directly onyour skin, just below your breastplate. Itshould be snug enough to stay in placeduring your run.1 Connect the heart rate monitor module➊ to the strap.