190-00692-00 Rev. B Garmin G1000 Pilot’s Guide for Piper PA32 2-21FLIGHT INSTRUMENTS2.2 SUPPLEMENTAL FLIGHT DATANOTE: Pressing the DFLTS Softkey (a second-level PFD softkey) turns off metric Altimeter display, the InsetMap, and wind data.Some displayed information disappears when pitch exceeds +30˚/-20˚ or bank exceeds 65˚. The Altimeter andAirspeed, Attitude, Vertical Speed, and Horizontal Situation indicators remain on the display and the BearingInformation and Annunciation windows can be displayed during such situations. The following informationis removed from the PFD (and corresponding softkeys are disabled) when the aircraft experiences unusualattitudes:• Traffic Annunciations• Inset Map• Outside air temperature (OAT)• DME Information Window• Wind data• Transponder Status Box• System Time• PFD Setup Menu• Windows displayed in the lowerright corner of the PFD:– Timer/References– Nearest Airports– Flight Plan– Alerts– Procedures– DME Tuning• Minimum Descent Altitude/Decision Height readout• Glideslope, Glidepath, andVertical Deviation Indicators• Altimeter Barometric Setting• Selected Altitude• VNAV Target AltitudeGENERIC TIMERFigure 2-30 Timer/References WindowThe PFD generic timer can be set to count up or down from a specified time (HH:MM:SS). When thecountdown on the timer reaches zero, the digits begin to count up from zero. If the timer is reset beforereaching zero on a countdown, the digits are reset to the initial value. If the timer is counting up when reset,the digits are zeroed.Setting the generic timer:1) Press the TMR/REF Softkey.2) Turn the large FMS Knob to select the time field (hh/mm/ss).3) Use the FMS Knob to enter the desired time and press the ENT Key.
