Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang190-00600-04 Rev. A 91Annunciations & AlertsFlightInstruments EICASNav/Com/XPDR/Audio AFCS GPS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix IndexGMC 710 MESSAGE ADVISORIESMessage CommentsGMC CONFIG – GMC Config error.Config service req’d.GMC 710 configuration settings do not matchthose of backup configuration memory. Thesystem should be serviced.GMC FAIL – GMC is inoperative. A failure has been detected in the GMC 710.The GMC 710 is unavailable.MANIFEST – GMC softwaremismatch. Communication halted.The GMC 710 has incorrect software installed.The system should be serviced.GMC KEYSTK – GMC [key name]Key is stuck.A key is stuck on the GMC 710 bezel. Attemptto free the stuck key by pressing it severaltimes. The system should be serviced if theproblem persists.MISCELLANEOUS MESSAGE ADVISORIESMessage CommentsFPL WPT LOCK – Flight planwaypoint is locked.Upon power-up, the system detects that astored flight plan waypoint is locked. Thisoccurs when a navigation database updateeliminates an obsolete waypoint. The flightplan cannot find the specified waypoint andflags this message. This can also occur withuser waypoints in a flight plan that is deleted.Remove the waypoint from the flight plan if itno longer exists in any database,Orupdate the waypoint name/identifier to reflectthe new information.FPL WPT MOVE – Flight planwaypoint moved.The system has detected that a waypointcoordinate has changed due to a newnavigation database update. Verify that storedflight plans contain correct waypoint locations.TIMER EXPIRD – Timer has expired. The system notifies the pilot that the timer hasexpired.
