Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang190-00600-04 Rev. A 21Flight PlanningFlightInstruments EICASNav/Com/XPDR/Audio AFCS GPS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix IndexFLIGHT PLANNINGWEIGHT PLANNINGAll procedures apply to the MFD unless otherwise stated.Entering Weight ParametersTurn the large FMS Knob to select the ‘AUX’ page group. Turn the small FMSKnob to select the Weight Planning Page.1) Select the EMPTY WT Softkey to place the cursor in the Basic EmptyWeight field.2) Enter the desired aircraft empty weight.3) Press the ENT Key. The cursor is now over the ‘PILOT & STORES’ field.4) Enter the desired weight of Pilot & Stores.5) Press the ENT Key.6) Continue repeating these steps until all desired weights have been entered.Entering Fuel Parameters1) If necessary, press the FMS Knob to activate the cursor.2) Turn the large FMS Knob to place the cursor in the ‘FUEL ON BOARD’ field.3) Select the FOB SYNC Softkey to enter the fuel on board quantity as readfrom the aircraft fuel quantity sensors.Or:Manually enter the desired fuel quantity.4) Press the ENT Key. The cursor is now in the ‘FUEL RESERVES’ field.5) Enter the desired reserve fuel quantity.6) Press the FMS Knob to remove the cursor.TRIP PLANNING1) Turn the large FMS Knob to select the ‘AUX’ page group.2) Turn the small FMS Knob to select the Trip Planning Page.3) The current ‘PAGE MODE’ is displayed at the top of the page: ‘AUTOMATIC’or ‘MANUAL’. To change the page mode, select the AUTO or MANUALSoftkey.
