Garmin G1000 Reference Manual

Also see for Cessna Caravan G1000: Cockpit reference guide Pilot's guide Pilot's guide Pilot's guide Pilot's guide

Contents

Garmin G1000 Reference Manual Manual pdf 41 page image

Garmin G1000 Cockpit Reference Guide for the Cessna Caravan190-00748-02 Rev. B 25Flight planningFlightInstruments EISNav/Com/XPDR/Audio AFCS GPS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix IndexCreate a neW user Waypoint deFined by latitude & longitude1) Turn the large FMS Knob on the MFD to select the ‘WPT’ page group.2) Turn the small FMS Knob to select the User WPT Information Page.3) Press the NEW Softkey. A waypoint is created at the current aircraftposition.4) Enter the desired waypoint name.5) Press the ENT Key.6) The cursor is now in the ‘WAYPOINT TYPE’ field. If desired, the waypointcan be made temporary (deleted automatically when the system is turnedoff). If the waypoint is to remain in the system, proceed to step 7.a) Turn the large FMS Knob one click to the left to highlight‘TEMPORARY’.b) Press the ENT Key to place a check-mark in the box. Turn the largeFMS Knob to place the cursor back in the ‘WAYPOINT TYPE’ field.7) With the cursor in the ‘WAYPOINT TYPE’ field, turn the small FMS Knob todisplay a list of waypoint types.8) Turn the small FMS Knob to select LAT/LON (latitude and longitude).9) Press the ENT Key.Create a neW user Waypoint deFined by radials From otherWaypoints1) Turn the large FMS Knob on the MFD to select the ‘WPT’ page group.2) Turn the small FMS Knob to select the User WPT Information Page.3) Press the NEW Softkey. A waypoint is created at the current aircraftposition.4) Enter the desired waypoint name.5) Press the ENT Key.6) The cursor is now in the ‘WAYPOINT TYPE’ field. If desired, the waypointcan be made temporary (deleted automatically when the system is turnedoff). If the waypoint is to remain in the system, proceed to step 7.a) Turn the large FMS Knob one click to the left to highlight‘TEMPORARY’.b) Press the ENT Key to place a check-mark in the box. Turn the largeFMS Knob to place the cursor back in the ‘WAYPOINT TYPE’ field.