Garmin G1000 Reference Manual

Also see for Cessna Caravan G1000: Cockpit reference guide Pilot's guide Pilot's guide Pilot's guide Pilot's guide

Contents

Garmin G1000 Reference Manual Manual pdf 47 page image

Garmin G1000 Cockpit Reference Guide for the Cessna Caravan190-00748-02 Rev. B 31Flight planningFlightInstruments EISNav/Com/XPDR/Audio AFCS GPS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix Index4) Turn the small FMS Knob. The Waypoint Information Window is nowdisplayed.5) Enter the new flight plan waypoint by one of the following:a) Enter the user waypoint identifier, facility, or city.b) Press the ENT Key.Or:a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint listis displayed.b) Turn the small FMS Knob to the right to display the ‘NRST’ airports tothe aircraft’s current position.c) Turn the large FMS Knob to select the desired waypoint.d) Press the ENT Key.Or:a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint listis displayed.b) Turn the small FMS Knob to the right to display the ‘RECENT’waypoints.c) Turn the large FMS Knob to select the desired waypoint.d) Press the ENT Key.Or:a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint listis displayed.b) Turn the small FMS Knob to the right to display the ‘USER’ waypoints.c) Turn the large FMS Knob to select the desired user waypoint.d) Press the ENT Key.6) Press the ent Key again to “accept” the waypoint.enter an airWay in a Flight plan1) Press the FPL Key.2) Press the FMS Knob to activate the cursor (not required on the PFD).3) Turn the large FMS Knob to highlight the waypoint after the desired airwayentry point. If this waypoint is not a valid airway entry point, a valid entrypoint should be entered at this time.