Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series 190-01344-00 Rev. B26Flight PlanningFlightInstrumentsNav/Com/XPDR/AudioAFCSGPS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAnnun/AlertsAppendixIndexa) Turn the small FMS Knob to the left. Initially, a flight plan waypoint listis displayed.b) Turn the small FMS Knob to the right to display the ‘NRST’ airportwaypoints to the aircraft’s current position.c) Turn the large FMS Knob to select the desired waypoint.d) Press the ENT Key.Or:a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint listis displayed.b) Turn the small FMS Knob to the right to display the ‘RECENT’waypoints.c) Turn the large FMS Knob to select the desired waypoint.d) Press the ENT Key.ENTER AN AIRWAY IN A FLIGHT PLAN1) Press the FPL Key on the Control Unit.2) Press the FMS Knob to activate the cursor (not required on the PFD).3) Turn the large FMS Knob to highlight the waypoint after the desired airwayentry point. If this waypoint is not a valid airway entry point, a valid entrypoint should be entered at this time.4) Turn the small FMS Knob one click clockwise and select the LD AIRWYSoftkey, or press the MENU Key and select “Load Airway”(required onthe PFD). The Select Airway Page is displayed. The LD AIRWY Softkeyor the “Load Airway” menu item is available only when an acceptableairway entry waypoint has been chosen (the waypoint ahead of the cursorposition).5) Turn the FMS Knob to select the desired airway from the list, and press theENT Key. Low altitude airways are shown first in the list, followed by “all”altitude airways, and then high altitude airways.6) Turn the FMS Knob to select the desired airway exit point from the list, andpress the ENT Key. ‘LOAD?’ is highlighted.7) Press the ENT Key. The system returns to editing the flight plan with thenew airway inserted.
