Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series 190-01344-00 Rev. B66Additional FeaturesFlightInstrumentsNav/Com/XPDR/AudioAFCSGPS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAnnun/AlertsAppendixIndex.9) Press the ENT Key. REGISTER will now be highlighted.10) Press the ENT Key. System registration is complete when ‘REGISTERED’ isdisplayed in the STATUS field.Disable/Enable Iridium TransceiverIridium telephone and data communications may be turned on or off by performingthese simple steps.Disable/Enable Telephone and Low Speed Data Services:1) Turn the large FMS Knob on the MFD to select the AUX page group.2) Turn the small FMS Knob to select the AUX-REPORTS STATUS or AUX-WI-FISETUP Page.3) If necessary, select the REPORTS Softkey. The AUX-REPORT STATUS Page isnow displayed.4) Press the MENU Key. The Page Menu window is now displayed.5) Turn the FMS Knob to select ‘Disable Iridium Transmission’ in the menu list.6) Press the ENT Key. The Iridium transceiver is now disabled.7) To enable the Iridium transceiver, repeat steps 1 through 4, then select‘Enable Iridium Transceiver’.Telephone CommunicationThe pilot or copilot can place and answer calls on the Iridium satellite networkas well as to or from the telephone handset in the cabin. Calls can also be answeredor made from the cabin phone, however, only actions initiated from the cockpitphone will be discussed here. See the cabin handset user guide for more information.Control and monitoring of telephone functions are accomplished through the AUX-TELEPHONE Page.Viewing the Telephone Page1) Turn the large FMS Knob on the MFD to select the AUX page group.2) Turn the small FMS Knob to select the AUX - TELEPHONE or AUX - TEXTMESSAGING Page.3) If necessary, select the TEL Softkey to display the AUX-TELEPHONE Page.
