Garmin G3X Touch Maintenance Manual

Also see for G3X Touch: Quick reference guide Installation manual Pilot's guide Pilot's guide Pilot's guide

Contents

Garmin G3X Touch Maintenance Manual Manual pdf 82 page image

Maintenance Manual 190-02472-02G3X Touch EFIS Part 23 AML STC Revision 2Page 72 Install the transducer and fuel hoses routed as far away from the aircraft exhaust system aspractical. Securely wrap and the transducer with Aeroquip AE102-( ) fire-sleeve if within six inchesof any exhaust component. Line fittings, routing, alignment, bonding, and support spacing must be installed as defined in theaircraft maintenance manual or section 8-31 of AC 43.13-1B, “Aircraft Inspection and Repair”.WARNINGEnsure the fuel flow transducer installation does not introduce thread sealant or debris into the fuel system.CAUTIONDo not blow pressurized air through the flow transducer.Figure 6-11 – Fuel Flow Transducer Installation Example6.7 GAD 29B ARINC 429 AdapterRemoval:1. Gain access to the GAD 29B. Refer to the location information recorded in APPENDIX A of thisdocument and maintained with the aircraft records.2. Disconnect the GAD 29B connectors.3. Remove the four screws that hold the GAD 29B to the mounting location.4. Lift the GEA 24 off its mounting location.