Garmin G900X Pilot’s Guide190-00726-00 Rev. J 541ADDITIONAL FEATURESSYSTEMOVERVIEW FLIGHTINSTRUMENTS EIS AUDIO PANEL& CNS FLIGHTMANAGEMENT HAZARDAVOIDANCE AFCS ADDITIONALFEATURES APPENDICES INDEXSVS FEATURESFigure 8-3 SVS on the Primary Flight DisplaySVSSoftkeysSyntheticTerrainPathwaysFlightPathMarkerAirportRunwayZeroPitch Line(ZPL) withCompassHeadingMarksTrafficAirplaneSymbolNOTE: Pathways and terrain features are not a substitute for standard course and altitude deviationinformation provided by the altimeter, CDI, and VDI.PATHWAYSPathways provide a three-dimensional perspective view of the selected route of flight shown as colored rectangularboxes representing the horizontal and vertical flight path of the active flight plan. The box size represents 700 feetwide by 200 feet tall during enroute, oceanic, and terminal flight phases. During an approach, the box width is700 feet or one half full scale deviation on the HSI, whichever is less. The height is 200 feet or one half full scaledeviation on the VDI, whichever is less. The altitude at which the pathway boxes are displayed is determined bythe selected altitude during climb, cruise, and when the active leg is the final approach course prior to interceptingthe glidepath/glideslope. During a descent (except while on the approach glidepath/glideslope), the pathway boxesare displayed at the selected altitude, or the VNAV altitude programmed for the active leg in the flight plan, or thepublished altitude constraint, whichever is higher (Figure 8-4). Just prior to intercepting the glidepath/glideslope,the pathway boxes are displayed on the glidepath/glideslope, or the selected altitude, whichever is lower.The color of the rectangular boxes may be magenta, green, or white depending on the route of flight and navigationsource selected. The active GPS or GPS overlay flight plan leg is represented by magenta boxes that correspond tothe Magenta CDI. A localizer course is represented by green boxes that correspond to a green CDI. An inactiveleg of an active flight plan is represented by white boxes corresponding to a white line drawn on the Inset map orMFD map indicating an inactive leg.
