Garmin GDL 69 Activation Instructions

Also see for GTN 725: User manual Maintenance manual Maintenance manual Maintenance manual User manual

Contents

Garmin GDL 69 Activation Instructions Manual pdf 20 page image

Page 14 190-00355-04GDL 69/69A XM Satellite Radio Activation Procedures Rev. JFigure 4-2. Data Link Status Page5. Refer to Table 4-1 to read the SAT ID/CONNECTIVITY information.6. Verify radio IDs and signal quality is between 2 – 3. If signal quality is zero, check the antenna andwiring.Table 4-1. Data Link StatusSAT ID Field„- -„ GDL 69/69H – 430/530 Series interface communications not yet established.„XM‟ GDL 69/69H not yet communicating with internal satellite radio hardware (normalduring power-up).„X0‟, „X1‟, „X2‟, or „X3‟ „X‟ = Satellite radio service activated. Satellite signal quality is indicated by thenumbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.„-0‟, „-1‟, „-2‟, or „-3‟ „-‟ = Satellite radio service is not activated. Satellite signal quality is indicated bythe numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.Connectivity Field“Searching...” No satellite is currently in view, signal quality is „0‟.“Satellite in view” Indicates a signal quality between 1 and 3.4.3 Verify XM Subscribed ServicesThe 430/530 supports the following weather services: NEXRAD, graphical METAR, text-basedMETAR, Wind, and Graphical Temperature/Dew Point. These services are available only in theUnited States. Verify included services by displaying them on the unit, if applicable. If signal quality isbetween 1 and 3, but no data is displayed, contact XM Satellite Radio to verify subscription. Be sure thatthe unit is updated with the most current software.