Garmin GDL 69 Activation Instructions

Also see for GTN 725: User manual Maintenance manual Maintenance manual Maintenance manual User manual

Contents

Garmin GDL 69 Activation Instructions Manual pdf 33 page image

190-00355-04 Page 27Rev. J GDL 69/69A XM Satellite Radio Activation Procedures7. For GDL 69A/69AH units, the audio portion is activated independently from the weather. Theactivations will not be simultaneous. Once the data channel is activated, bring up the XM Radiopage on the GMX 200. This can be accomplished by pressing the FN key until XM is displayed.Press the XM smart key. A non-activated unit will display only channel 0 (Radio ID) and channel 1(XM Preview). An activated unit will display the full list of XM channels. Tune to channel 1, whilewaiting for audio activation. Wait for the XM display to become populated with the XM channel list(see Figure 6-2 above for an example of what this looks like).8. Select an XM channel in order to lock in the radio activation.Channels 0, 1 are free preview channels and should not be used for this procedure. Press either theUp or Down Arrow key and then press the SEL key to select a new channel. Wait for the channel tobe displayed in the Active Channel box at the top of the XM display. The XM radio activation iscomplete when the channel is displayed.6.2 RefreshingIf the unit is not activated after one hour a „refresh‟ may be needed. To accomplish this go to the websitehttps://care.siriusxm.com/retailrefresh_view.action as explained in Section 2.2. When asked for the RadioID number on the website, enter the ID number of the service you are refreshing, either your audiopackage or your data (weather) package. If refreshing both, you‟ll have the opportunity to „refreshanother XM radio‟. If you still are having trouble, call Garmin AT technical support using the telephonenumbers listed at the front of this guide.6.3 Deactivating and Reactivating the GDL 69 SeriesWhen the GDL 69 Series is not properly activated, in some cases it may be necessary to perform a fulldeactivation and reactivation of the system in order to make it work properly. This procedure iscomplicated and should never be attempted without the guidance of Garmin AT technical supportpersonnel. Please contact Garmin AT technical support using the telephone numbers listed at the front ofthis guide.