3Pairing the Sensor1 Hold to turn on the sensor�2 Turn on the other device and enablethe Bluetooth component�You can refer to the device’sdocumentation for specific instructionsabout enabling Bluetooth wirelesstechnology�3 Bring the sensor within 30 feet (10meters) of the mobile device�4 Using the mobile device, pair thesensor with the mobile device�The blue LED is solid blue when thesensor is connected to the other device�If the sensor has not established aBluetooth connection for several minutes,it turns off automatically�Bluetooth LEDLED DescriptionSlow flashingblueSearching for mobile devicesRapid flashingbluePairingSolid blue Connected to mobile deviceStatus LEDLED DescriptionSlow flashing orange ChargingSolid orange Battery charged,power connected�Orange off Battery charged,power disconnected�Rapid flashing orange Low batteryAlternating orangeand greenFaulty battery orsystem errorFlashing green Searching for GPSsatellitesSolid green GPS satellite fixAcquiring Satellite Signals1 Verify that the blue LED on the sensoris solid blue, indicating a wirelessconnection�2 Place the sensor where it has a clearview of the sky�Acquiring satellite signals may take afew minutes. The Status LED flashesgreen while searching for satellites andestablishing your location� The Status LEDis solid green when it has established a fixon your location�Glo_2_Instructions_print.indd 3 8/1/2018 12:36:52 PM