Garmin GLO for Aviation Instructions Manual

Also see for GLO sensor: Instructions Instructions Instruction manual

Contents

Garmin GLO for Aviation Instructions Manual Manual pdf 2 page image

2Installing the Battery WarnIngThis product contains a lithium-ion battery.See page 5 for important battery safetyinformation.1 With your thumbnail, slide the batterycover release tab ➊.➌ ➊➋2 Remove the battery cover ➋.3 Locate the metal contacts on the endof the lithium-ion battery.4 Insert the battery ➌ so the metalcontacts on the battery align withthe metal contacts inside the batterycompartment.5 Press the battery down into place.6 Insert the battery cover into thenotches and press down.The release tab locks the cover inplace.replacement BatteryYou can purchase a replacement battery(010-10840-00) at http://buy.garmin.com.Charging the BatteryYou can use the sensor while you arecharging it.1 Plug the small end of the power cableinto the mini-USB connector on theend of the sensor.2 Plug the other end of the power cableinto an appropriate source of power forthe cable type.It takes about three hours to charge thebattery. A fully charged battery lasts about12 hours.note: If the battery has not been chargedfor a long period of time, remove thebattery, connect the cable to the deviceand a power source, and then replace thebattery. The battery will charge as usual.