· Move the cursor over the position in the route where you wish to enterthe new waypoint.· Enter the new waypoint. The waypoints of the route will shift to theright to make room for the new waypoint.To delete a waypoint from a route...· Place the cursor over the desired route on the Route Catalog Pageand press the ENT key. The Route Review Page will be displayed.· Place the cursor over the waypoint you wish to delete.· Press the CLR key followed by the ENT key to delete the waypoint.7.4 ACTIVATING ROUTES"Active from" Waypoint "Active to" WaypointTime Selection"Active to"WaypointIndicatorWaypoint Distance TimeACTIVE ROUTE PAGERoutes are activated using the Route Review Page. You may activate anyroute in the displayed order or in reverse order. (NOTE: When a new routeis activated, the previous contents of route 0 will be overwritten. If you wishto save route 0, be sure to copy it to an empty route first.)To activate a route...· Place the cursor over the desired route on the Route Catalog Pageand press the ENT key. The Route Review Page will be displayed.· With the cursor over “ACT?”, press the ENT key to activate the routein the displayed order. Use “INV?” field to activate the route in reverseorder.7-5
