Garmin GPS 500 Pilot's Manual & Reference

Also see for GPS 500: Instructions Pilot's guide addendum Pilot's guide addendum Installation manual Pilot's guide addendum

Contents

Garmin GPS 500 Pilot's Manual & Reference Manual pdf 104 page image

GPS 500 Pilot’s Guide and Reference6-6SECTION 6WPT PAGES6.3 AIRPORT RUNWAy PAGEThe Airport Runway Page (Figure 6-9) displays runwaydesignations, length, surface type, and lighting for theselected airport. A map image of the runway layout andsurrounding area is also displayed on the Airport RunwayPage. The map image range appears in the lower leftcorner and is adjustable using the RNG Key. For airportswith multiple runways, information for each runway isavailable.To view runway information for a particular airport onthe Airport Runway Page, enter the airport’s identifier perSection 6.1.Figure 6-9 Airport Runway PageMap ImageAirport Identifier,Symbol, and TypeRunwayDesignationsRunwayLength andWidthRunwaySurfaceRunwayLightingNumber of Pages inCurrent Page GroupPosition of Current Pagewithin Current Page GroupCurrentPage GroupDisplaying information for each additionalrunway:1) Press the small right knob to activate thecursor.2) Turn the large right knob to place the cursoron the runway designation field.3) Turn the small right knob to display a windowlisting all runways for the selected airport(Figure 6-10).Figure 6-10 Runway Window4) Continue turning the small right knob to selectthe desired runway.5) Press the ENT Key to display information forthe selected runway on the Airport RunwayPage (Figure 6-11).Figure 6-11 Airport Runway Page6) To remove the flashing cursor, press the smallright knob.190-00181-60 Rev. G