Dash Mount InstructionsStandard Parts:uBracket 0)Pivot Base (1)Velcro (2)3mmLocking Knob (2)1. Insert the GPS unit into the bracket:A. Mate the two clips at the bottom of thebracket with the notches in the bottomof the GPS unit. Snap the clips at the topof the bracket into the notches in thetop of the unit by pressing firmly.B. (Optional) Use the 3mm locking knob tosecure the bracket to the back of the GPSunit for added security in rough terrain.(Fig. 1) (Note: Use only the knobs sup-plied with the mount. Using incorrecthardware may damage your mount.)2. Remove the GPS unit from the bracket:Unscrew the locking knob if necessary.Press the top of the bracket outward andflex it to release the clips from the unit.Fig. 1

Garmin GPS II Mount Instructions