Garmin GPSMAP 162 Owner's Manual

Also see for GPSMAP 162 Sounder: Specifications Owner's manual

Garmin GPSMAP 162 Owner's Manual Manual pdf 55 page image

46ReferenceGoing to a DestinationTo turn proximity alarms on or off:1. Use the ARROW KEYPAD to highlight the field below “Proximity Alarm” and pressENTER/MARK.2. Select the desired ‘ON’ or ‘OFF’ setting and press ENTER/MARK.To clear one or all proximity waypoint(s) from the list:1. Use the ARROW KEYPAD to highlight the proximity waypoint to clear and then press the MENUkey.2. To clear a single alarm, highlight the ‘Clear Alarm’ field and press ENTER/MARK.3. To clear all proximity waypoints, select the ‘Clear All’ option and press ENTER/MARK.4. Use the ARROW KEYPAD to highlight the ‘OK’ prompt and press ENTER/MARK to confi rm.Going to a DestinationUsing the NAV/MOB key, the GPSMAP 162 provides four ways to navigate to a destination: Go ToWaypoint, Follow Track (TracBack), MOB (Man OverBoard), and Follow Route navigation. Once youare actively navigating, you will see a straight line that always runs from the point where you started theGOTO, to the destination. The easiest method for selecting a destination is the ‘Go To’ function, whichlets you select a destination waypoint and quickly sets a direct course from your present position.If you have a waypoint highlighted on a list or the map, ‘Go To ’ will appear inaddition to ‘Go To Waypoint’. The ‘Go To’ function can be accessed from a list of waypoints orgraphically from the map display.A dashed circle will appear showingthe alert boundary for the proximitywaypoints.Proximity Circle Proximity Waypointwww.reelschematic.comwww.reelschematic.com