Garmin GPSMAP 175 Owner's Manual

Garmin GPSMAP 175 Owner's Manual Manual pdf 42 page image

A. Ten data options areavailable for eachdata field. Thedigital crosstrackerror option isuseful to display theexact distance youare off course infeet/miles or meters.B. To select whatwaypoints appear on the graphic highway, highlight the desired setting and pressEDIT/ENTER.NAVIGATION PAGENav Page OptionsThe following options are available for the navigation page:• Change Data Fields?— allows you to define the data displayed in anyof the six user-selectable data fields. Ten data options are available:• BRG– bearing to active wpt • DIS– distance to active wpt• SOG– speed over ground • COG– course over ground• ETE– estimated time enroute • ETA– estimated time of arrival• XTK– crosstrack error • VMG– velocity made good• TRN– turn angle to wpt • CTS– course to steerTo change a data field:1. Highlight the ‘Change Data Fields?’ option and press T.2. Highlight the field you want to change and press T.3. Select the desired data field option and press T.• Configure Highway?— allows you to select what waypoints are shownon the highway display. Four options are available:• Nav & Nearest Waypoints— all route and nearest waypoints displayed• Nav Waypoints— only waypoints in the active route will be displayed• Active Waypoint— only the active waypoint will be displayed• No Waypoints— no waypoints will be displayedTo configure the highway display:1. Highlight the ‘Configure Highway?’ option and press T.2. Select the desired option and press T.• Restore Defaults?— resets all navigation page options to the factory settings.• Setup Simulator?— allows you to define speed, course and positionvalues while in simulator mode. See pages 10-22 for more details onusing simulator mode.• Auto COG?— allows you to reset automatic steering while simulatingnavigation and cancel any course adjustments made with the R keypad.384