Garmin GPSMAP 175 Owner's Manual

Garmin GPSMAP 175 Owner's Manual Manual pdf 85 page image

Proximity Alarm—You have entered the alarm radius for the proximity waypointindicated.Proximity List Full—You have used all nine proximity waypoints.Proximity Overlaps Another Prox Wypt—The alarm radius specified overlapsthe area specified for another proximity waypoint. (See page 47 for moreinformation on proximity overlaps.)RAM has Failed—The random access memory has failed and the unit is notoperable. Take your unit to an authorized GARMIN service center for repairs.ROM has Failed—The unit’s permanent memory has failed and the unit is notoperable. Take your unit to an authorized GARMIN service center for repairs.Received Invalid Waypoint—A waypoint was received during upload transferthat has an invalid identifier.Receiver has Failed—A failure in receiver hardware has been detected. If thismessage persists, do not use the unit and take it to an authorized dealer for repair.Route Already Exists—The route number you are trying to copy to is alreadyused.Route Does Not Exist—The route number you are trying to use or copy is notdefined.Route is Full—You have attempted to add more than 30 waypoints to a route.Route Memory is Full—You have attempted to create more than 20 routes.Route Waypoint was Deleted—A route waypoint entered does not exist in thedatabase and has been deleted from the route.RTCM Input has Failed—DGPS data being received has been lost. You are nolonger receiving the beacon signal.Searching the Sky—The GPSMAP 175 is searching the sky for almanac data.Stored Data was Lost—All waypoints, routes and almanac data has been lostdue to internal battery failure.There is No RTCM Input—The beacon receiver is not properly connected orbaud rates do not match.Timer Has Expired—The countdown timer has expired.Track Memory is Full—The track memory is full and no additional track plot willbe recorded until the track memory has been cleared or set to wrap mode.Wypt Already Exists—The waypoint name you’ve entered already existsin memory.Waypoint Memory is Full—You have used all 250 waypoints in the GPSMAP130 system.APPENDIXMessages81C