Garmin GPSMAP 2206, 2210 Owner's Manual

Also see for GPSMAP 2206: Quick reference guide Install guide

Contents

8 GPSMAP 2206/2210 Owner’s ManualBASIC OPERATION > U SING THE GPSMAP 2206/2210B ASIC OPERATIONUsing the GPSMAP 2206/2210The advanced keypad system on the GPSMAP 2206/2210 is designed to allowyou to select options and enter data quickly and conveniently. As you progressthrough this owner’s manual, you are directed to press a specific key or highlighta field on the screen. When you are directed to press a key, you should press andquickly release the key. If you need to hold down the key for a period of timeto activate a secondary function, the instructions tell you to do so. The locationof the highlight is controlled by the ROCKER. When a field is selected on thescreen, it is highlighted in yellow.The following terms are used throughout this manual:• Highlight—move the highlighted area on the screen up, down, left, or rightwith the ROCKER to select individual fields. Moving the highlight to agiven location allows you to make a selection, begin data entry, or scrollthrough a list.• Field—the location on a page where data or an option can be entered anddisplayed. Highlight a field using the ROCKER to begin entering data orselecting options.• Soft keys—located along the bottom of the screen, soft keys are usedas shortcuts to select the most commonly used options for the selectedpage, window, or tab. To select a soft key, press the soft key button ( )directly below it.• On-Screen button—use the ROCKER to highlight an on-screen button,and press ENTER to select the button.FieldOn-screenbuttonHighlighted fieldSoft keys• Scroll bar—When viewing a list of items too long to show on the screen,a scroll bar appears along the right side of the list. To scroll through a list,press up or down on the ROCKER. Press right or left on the ROCKER toscroll one page at a time.• Default—the factory setting saved in the unit’s memory. You can changethe settings, but you can also revert to the factory (default) settings whenyou press the Factory Dflts soft key on the System–General sub tab.