Garmin GPSMAP 2206, 2210 Owner's Manual

Also see for GPSMAP 2206: Quick reference guide Install guide

Contents

GPSMAP 2206/2210 Owner’s Manual 19BASIC OPERATION > N AVIGATING TO A DESTINATIONTo add a proximity waypoint:1. Press the New Alarm soft key on the Proximity sub tab. The Find FromCurrent Position Page appears.2. Highlight a category, and press ENTER.3. Use the ROCKER to highlight a waypoint or map item, and press ENTER.The Review Page appears for the selected waypoint or map item within ared circle.4. Press the OK soft key. The Proximity sub tab appears with the Distancehighlighted.5. Press ENTER, and use the ROCKER to enter a proximity radius (up to99.99 units).6. Press ENTER when finished.To turn proximity alarms on or off:1. Use the ROCKER to highlight the field below Proximity Alarm on theProximity sub tab, and press ENTER.2. Select ON or OFF, and press ENTER.To clear one or all proximity waypoints from the list:1. Use the ROCKER to highlight the proximity waypoint you want to clear.2. To clear a single alarm, press the Delete soft key.ORTo clear all proximity waypoints, press the Delete All soft key. Aconfirmation message appears.3. Press the OK soft key to delete the proximity waypoint. Otherwise, pressthe Cancel soft key, or press QUIT to cancel.Navigating to a DestinationUsing the NAV key, the GPSMAP 2206/2210 provides four ways to navigate to adestination: Go To Point, Follow Track, TracBack, and Follow Route. When youare actively navigating, you see a straight line on the Map Page that always runsfrom your current location to the destination. The easiest method for selecting adestination is the Go To function, which allows you to select a destination point,and then set a direct course to it from your present location. If you highlighta point on a list or the map and press NAV, Go To appears inaddition to Go To Point. The Go To function can be accessed from any list ofpoints or from the map display.DestinationCurrent locationNavigating to a Destination