Creating a Waypoint by Entering CoordinatesYou can manually enter location coordinates to create a waypoint.This method is useful for creating a waypoint at a specificlatitude/longitude position from a chart.To create a new waypoint by entering locationcoordinates:1. Press and hold ENTER/MARK to create a waypoint. Thenew waypoint is created with the next available waypointnumber and the receiver’s last known location as the defaultlocation.2. On the New Waypoint Page, highlight the Location field, andpress ENTER.Entering location coordinates.3. Use the ROCKER to enter location coordinates, and pressENTER when finished.To change any of the other information on the New MapWaypoint Page, highlight the appropriate field, and pressENTER. After entering your changes, highlight OK, and pressENTER.Reviewing a WaypointAfter you create and store a waypoint, you can modify, review,rename, move, or delete it at any time using the Waypoint Reviewand Waypoint Edit Pages.To access the Waypoint Review Page:Highlight a waypoint on the Map Page, and then pressENTER to open the Waypoint Review Page. If the waypointis located on a map feature or MapSource or BlueChart g2feature, the Waypoint Review Page might include additionaltabs containing information about other features at thatlocation.Waypoint Review Page26 GPSMAP 276C Owner’s ManualMArIne Mode > creAtIng And usIng WAyPoInts
