Garmin GPSMAP 292 Owner's Manual

Also see for GPSMAP 292 - Marine GPS Receiver: Install guide Quick reference guide Declaration of conformity

Contents

Garmin GPSMAP 292 Owner's Manual Manual pdf 106 page image

100 GPSMAP 292/298 Owner’s ManualAPPENDIX > M ESSAGESMessagesAccuracy Alarm—the GPS accuracy has fallen outside of user-setvalue.Alarm Clock—the alarm clock has sounded.Anchor Drag Alarm—you have drifted out of the specifieddistance range.Antenna Input is Shorted—some part of the antenna wiring iscontacting the chassis.Approaching [Waypoint Name]—you are a specified alarmdistance from a destination waypoint.Arriving At [Waypoint Name]—you arrived at the destinationwaypoint.Battery Alarm—battery voltage has fallen below the value enteredin the Battery Alarm setup.Can’t Read User Card—error reading card; remove and reinsert.Contact your dealer or Garmin Product Support if the problempersists.Can’t Read Voltages That High, Limited To Top Of Range—thevoltage value in the Battery Alarm setup is higher than the unit canread.Can’t Read Voltages That Low, Limited To Bottom Of Range—voltage value in the Battery Alarm setup is lower than the voltagewhere the unit automatically turns off.Can’t Unlock Maps—data on data card is not unlocked for theunit. Contact your dealer or Garmin Product Support.Can’t Write User Card, Data Card May Be Full—error readingcard; remove and reinsert. Contact your dealer or Garmin ProductSupport if the problem persists.Can’t Write User Card, Data Card Is Read-Only—the data cardin your unit contains data copy protection.Database Error—internal problem with the unit. Contact yourdealer or Garmin Product Support to have the unit serviced.Deep Water Alarm—the water is deeper than the amount set in theDeep Water Alarm.Directory Item With This MMSI Already Exists—MMSInumber already in DSC directory. Use a different number.Directory Memory is Full, Can’t Create Entry—DSC directoryhas reached maximum of 100 contacts. Delete unneeded contacts toadd new ones.Distress Call—a DSC distress call has been received. Takeappropriate action.Drift Alarm—the depth has changed by the amount of the DriftAlarm value.Fish Alarm (not a textual alarm, is indicated by a fish bitmapflashing in the upper left part of the display)—shows an iconand a beep sounds (if enabled) when a fish is detected. This alarmdoes not show a message banner.