24 GPSMAP 3005C Owner’s ManualBASIC OPERATION > C REATING AND USING ROUTESRoute List with Information9. Repeat steps 5–8 until all route points are entered. Press QUIT to returnto the Route Page.Navigating a Saved RouteAfter you create a route, press the NAV key to start the route and use it fornavigation. You can follow a route in the same sequence as it was originallycreated, invert and follow the route from the end point back to the beginningpoint, or re-evaluate it.To navigate a saved route:1. From any page, press NAV, and then highlight Follow Route on theNavigation menu.2. Press the Pick Saved soft key to select a saved route. The Select Routewindow opens.3. Use the ROCKER to highlight the route you want to navigate, and pressENTER. The selected route is shown on the Map Page.To stop navigating a route:Press NAV, highlight Stop Navigation on the Navigation menu, and pressENTER.The following options are available on the Navigation menu by pressing NAVwhile navigating a route:• Invert Route—reverses the route so you can follow it from the end pointback to the beginning.• Re-Evaluate Route—recalculates and reactivates the current route data;and it selects the route leg closest to your current location as the active leg(the active leg defines the current from and to waypoints).
