Garmin GNS 530/430 Sample Training Syllabus and Flight Lessons190-00334-00 Rev. AFLIGHT ORIENTATION15Lesson 3: GNS 530/430 Dual Installation IntroductionStudent: Date:Objective To develop the student’s ability to properly manage an integrated dual-installa-tion of GNS 530/430 avionics stack in an IFR environment.Elements a GMA 340 audio panel operationsa GNS 530/430 configuration and operationa GTX 330 operation and TIS data interpretationa GDL 49 operation and WX data interpretation and its relation to flightplanningSchedule a Pre-flight briefing and review of student’s preparations – 30 mina Student practice – 2 hrsa Post-flight critique – 30 mina Assignment for further student review – 5 minEquipment a Airplanea POH/AFM (appropriate Pilot’s Guide)a Charts appropriate to flighta Note-taking materialsInstructor’s actions Preflighta Explain objectivea Assign route of flighta Assign approach types to be completeda Assign required operations using TIS and WX dataa Describe typical operation flowa Describe common errorsIn-flighta Coach student performancePost-flighta CritiqueStudent’s actions a Ask questions regarding objective, elements and common errorsa Perform operations as directeda Post-flight – ask pertinent questionsCompletion standards Student should be able to complete basic tasks using all available avionics toolsto complete the flight and demonstrate function to instructor as requested.Possible errors to watch for a Not using the “enter” button to select stand-by frequenciesa Failure to use both COM radiosa Loading but not activating an approacha Improper CDI output selection in GNS 530/430 (GPS when should beVLOC and vice versa)a Use of Direct-To navigation when Flight Plan is more appropriate for longroute clearancesa Choosing wrong request type through GDL 49a Inability to interpret a graphical METAR requesta Not enabling cross-fill functiona Failure to use VNAV/VSR information to help plan descenta Not setting up displays to maximize the amount of data presented withoutoverlapping data