avIatIon22 GPSMAP 496 Owner's ManualbAsIc oPerAtIon In AvIAtIon Mode > selectIng An APProAchSelecting an ApproachCaUtion: The approaches provided in the Jeppesen databaseare for monitoring purposes only. The GPSMAP 496 is not anIFR-approved instrument and should not be used as a primarysource of navigation guidance in instrument conditions.When you select an approach, it replaces the destination airport withthe sequence of waypoints for the selected approach. Keep in mindthat the airport must have a published approach (GPS, RNAV, VOR,NDB, localizer, or ILS) and only the final course segment (usuallyfrom final approach fix to missed approach point) of the publishedapproach is available in the GPSMAP 496.notE: When using a route, the selected approach for thedestination airport overrides your current route. The originalroute is saved in the Route tab.You can select an approach several ways:Press Direct to and press MEnU on the Go To Page, asdescribed in the steps to the right.From the Active Go To (or Active Route) Page, press MEnU.From the Airport Details Page, select the Approach tab.•••To select an approach for the destination airport:1. Press Direct To to show the Go To Page. Select thedestination you want to travel to.2. Press MENU to open the options menu. Highlight SelectApproach, and press ENTER.3. Use the ROCKER to select the approach from the window,and press ENTER. A Vectors? window appears. See thefollowing page for more information on vectors.Selecting an Approach4. Use the ROCKER to select Yes or No, and press ENTER.The GPSMAP 496 removes the destination airport from theGo To and replaces it with the approach waypoints.
