69GPSmap 76CSGPS NavigationWelcome Page SetupWelcome Page SetupThe Welcome Page Setup Page allows you to insert a message such asownership information on the Welcome Page (the first page to displaywhen you turn the unit on).To setup the Welcome Page:1. Access the Welcome Page Setup Page as explained at thebeginning of this section.2. Use the keypad at the base of the screen to enter your welcomemessage. Use the ROCKER key to select text and press ENTER.3. When completed, highlight “OK” on the keypad and pressENTER to close or... press and hold the PAGE key.4. Turn you unit Off and then On again to view your WelcomePage message. You may edit the message as desired by follow-ing steps 1 through 3 again.Text andNumberKeypadPlacing your name and phone number on this pagemay aid in recovery of your unit should it become lostor stolen.Use the elevation deter-mined by the GPS receiver Calibration CompletePress ENTERCalibration FailedPress ENTER and retryAltimeter SetupAllow the GPS Receiver to determine the elevation: the GPS receiverestimates the current elevation whendetermining its location. The accurracy will vary depending on the position (telemetry) of satellites overhead.It won’t be as accurate as an elevationentered from a known source, but issuffi cient for most navigation applications.2. When fi nished, a Completed or Failedmessage will display.