GPSMAP 76CSx Owner’s ManualGettInG StartedTurning on the GPSM�P 76CSxTo turn the GPSM�P 76CSx on and off:Press and hold the POWER.Adjusting the BacklightTo adjust the backlight level:1. Press and quickly release the POWER key.2. Press up on the ROCKER to increase thebrightness, or press down to decrease.3. Press ENTER or QUIT to close.See page 40 for information on changing the screencolors and backlight time out and brightness levels.Initializing the GPS ReceiverThe first time you turn on your unit, the GPS receivermust collect satellite data and establish its currentlocation. To receive satellite signals, you should beoutdoors and have a clear view of the sky.To initialize your GPSM�P 76CSx:Hold the unit in front of you facing the sky andobserve the Satellite page. While the GPS receiveris searching for the satellite signals, a “LocatingSatellites” message is replaced by an “AcquiringSatellites” message until a location fix is made.The Strength ofeach satelltesgnal.The outercrclerepresentsthe horzon.The nnercrcle s 5degrees fromthe horzon.Headng bugndcates yourdrectonInitialization OptionsIf the unit cannot get a satellite fix, an optionsmenu with a list of solutions appears. Highlight theappropriate solution and press ENTER.