Garmin GPSmap 585 Plus Owner's Manual

Also see for GPSmap 585 Plus: Owner's manual

Contents

GPSMAP® 585 Plus 31Survey Coloring: Sets the color of the Garmin Quickdraw Contours display.When this setting is turned on, the colors indicate the quality of therecording. When this setting is turned off, the contour areas use standardmap colors.Green indicates good depth and GPS position, and a speed under 16 km/h(10 mph). Yellow indicates good depth and GPS position, and a speedbetween 16 and 32 km/h (10 and 20 mph). Red indicates poor depth orGPS position, and a speed above 32 km/h (20 mph).Depth Shading: Specifies the upper and lower limits of a depth range and acolor for that depth range.Adding a Label to a Garmin Quickdraw Contours MapYou can add labels to a Garmin Quickdraw Contours map to mark hazards orpoints of interest.1 From the Navigation chart, select a location.2 Select Add Quickdraw Label.3 Enter text for the label, and select SELECT.Garmin Quickdraw CommunityThe Garmin Quickdraw Community is a free, public, online community thatenables you to share your Garmin Quickdraw Contours maps with others.You can also download maps other users have created.To access the Garmin Quickdraw Community, sign in to your GarminConnect™ account, and then you can upload and download maps using amemory card.Accessing the Garmin Quickdraw CommunityYou can access the Garmin Quickdraw Community using Garmin Connectwebsite.1 Go to connect.garmin.com.2 Select Get Started > Quickdraw Community > Get Started.3 If you do not have a Garmin Connect account, create one.4 Sign in to your Garmin Connect account.5 Select Marine in the upper-right to open the Garmin Quickdraw widget.TIP: Make sure you have a memory card in your computer to shareGarmin Quickdraw Contours maps.Sharing Your Garmin Quickdraw Contours Maps with the GarminQuickdraw CommunityYou can share Garmin Quickdraw Contours maps that you have created withothers in the Garmin Quickdraw Community.When you share a contour map, only the contour map is shared. Yourwaypoints are not shared.1 Remove the memory card from the chartplotter.2 Insert the memory card into your computer.3 Access the Garmin Quickdraw Community (page 23).4 Select Share Your Contours.5 Browse to your memory card, and select the /Garmin folder.6 Open the /Quickdraw folder, and select the file named ContoursLog.svy.