GPSMAP® 585 Plus 453 Select an option:• To switch to position report details, select .• To switch to a Navigation chart marking the location, select .• To switch to a Navigation chart marking the location, select Next Page.• To view the position report details, select Previous Page.Navigating to a Tracked Vessel1 Select Navigation Info > Other Vessels > DSC List.2 Select a position-report call.3 Select Navigate To.4 Select Go To or Route To.Creating a Waypoint at the Position of a Tracked Vessel1 Select Navigation Info > Other Vessels > DSC List.2 Select a position-report call.3 Select Create Waypoint.Editing Information in a Position Report1 Select Navigation Info > Other Vessels > DSC List.2 Select a position-report call.3 Select Edit.• To enter the name of the vessel, select Name.• To select a new symbol, select Symbol, if available.• To enter a comment, select Comment.• To show a trail line for the vessel if your radio is tracking the position ofthe vessel, select Trail.• To select a color for the trail line, select Trail Line.Deleting a Position-Report Call1 Select Navigation Info > Other Vessels > DSC List.2 Select a position-report call.3 Select Edit > Clear Report.Viewing Vessel Trails on the ChartYou can view trails for all tracked vessels on some chart views. By default,a black line indicates the path of the vessel, a black dot indicates eachpreviously reported position of a tracked vessel, and a blue flag indicates thelast reported position of the vessel.1 From a chart or 3D chart view, select MENU > Other Vessels > DSCTrails.2 Select the number of hours to show tracked vessels on the chart.For example, if you select 4 Hours, all trail points that are less than fourhours old appear for all tracked vessels.Individual Routine CallsWhen you connect the chartplotter to a Garmin VHF radio, you can use thechartplotter interface to set up an individual routine call.When setting up an individual routine call from your chartplotter, you canselect the DSC channel on which you want to communicate. The radiotransmits this request with your call.Selecting a DSC ChannelNOTE: The selection of a DSC channel is limited to those channels that areavailable in all frequency bands. The default channel is 72. If you select adifferent channel, the chartplotter uses that channel for subsequent calls until