Garmin GST 10, Water Speed and Temperature Adapter Installation and Configuration Installation And Configuration Manual

Contents

Garmin GST 10, Water Speed and Temperature Adapter Installation and Configuration Installation And Configuration Manual Manual pdf 3 page image

GST 10 Installation and Configuration Instructions 4. Connect the NMEA 2000 connector on the GST 10 adapter to the T-connector added instep 3.5. (Optional) If the GST 10 adapter cannot connect directly to the NMEA 2000 backbone, routea NMEA 2000 drop cable (not included) to the bottom of the T-connector added in step 3.Use a drop cable with a length up to 20 ft. (6 m). Connect the drop cable to the T-connectorand to the NMEA 2000 connector on the adapter.notiCe: If you have an existing NMEA 2000 network on your boat, it should already beconnected to power. Do not connect an additional NMEA 2000 power cable to an existing NMEA2000 network, because only one power source should be connected to a NMEA 2000 network.➊➋ ➋➌➍➎Connecting the GST 10 Adapter to anExisting NMEA 2000 Network➊ GST 10 adapter➋ NMEA 000 device (not included)➌ Drop cable (optional - not included)➍ T-connector (one included)➎ Existing NMEA 000 networkConfiguring the GST 10 Adapternote: This section provides specific configuration information for the GST 10 adapter usingyour compatible Garmin display device. To access the NMEA 2000 configuration menu on yourdisplay device, consult the documentation provided with your display device.Calibrating the Water SpeedTo use the GST 10 adapter, you must calibrate the water speed.1. From the NMEA 2000 Devices list, select the GST 10 device.2. Select an option:For most Garmin chartplotters, select Review > Calibrate Water Speed.For other Garmin marine devices, select Config > Calibrate Water Speed.3. Follow the on-screen instructions to calibrate the water speed.••