Garmin GTN 6 series Maintenance Manual

Also see for GTN 6 series: Instructions System maintenance manual Maintenance manual Maintenance manual Maintenance manual

Contents

Garmin GTN 6 series Maintenance Manual Manual pdf 85 page image

190-01007-A1 System Maintenance Manual GTN 6XX/7XX Part 23 AML STCRev. 6 Page 6-17Figure 6-8. TVS/Fuse Replacement (TVS1/F1)TVS2 Removal1. Remove the ring terminal from ground as shown in Figure 6-10.2. Carefully remove heat shrink from the TVS assembly, ensuring not to cut the insulation on thewire under the heat shrink.3. If replacing the entire TVS assembly, unplug the 4-pin connectorand proceed to step (1) of thereplacement. If it is not necessary to replace all of the TVSs, carefully unpin the failed TVS(s).4. Apply heat with a soldering iron to opposite end of the TVS assembly so that the bad TVSs can beremoved. Use caution when applying heat to the solder joint to ensure that the remaining TVSsaren’t damaged.