14-16Garmin GTN 625/635/650 Pilot’s Guide 190-01004-03 Rev. FForewordGettingStartedXpdr CtrlCom/NavFPLDirect-ToProcWpt InfoMapTrafflcTerrainWeatherNearestServices/MusicUtilitiesSystemMessagesSymbolsAppendixIndex9. After completing the Trip Planning selections, touch theCompute Data key to display the trip statistics.Trip StatisticsTouch To ToggleBetween Statisticsand Data InputFigure 14-21 Utility Trip Planning Page With Computed Data (Point-To-Point Mode)NOTE: When Local Time is selected in the Setup-Date/Time feature, Sunrise/Sunset calculations in the Trip Planning feature are based on the Fromwaypoint time zone. For instance, a flight plan originating in the Pacifictime zone and ending in the Central time zone would show Sunset/Sunrisetimes at the destination in Pacific time. This potential offset does not occurwhen UTC time is used.14.4.2 Flight Plan Mode1. Touch the Mode key to select Flight Plan mode, if required.Touch To SelectP-to-P or FlightPlan ModeTouch To SelectFlight Plan FromCatalogTouch To SelectExpected AverageGround SpeedTouch To SelectDeparture TimeTouch To SelectDeparture DateTouch To SelectFlight Plan LegTouch To ToggleBetween Statisticsand Data InputTouch To ToggleSensor Data UseFigure 14-22 Utility Trip Planning Page Edit Input Data View (Flight Plan Mode)2. Touch the Flight Plan key to select the flight plan.Touch To Scroll ListTouch To SelectFlight Plan (ActiveFPL Shown)Figure 14-23 Select Flight Plan
