5-9190-01004-03 Rev. K Garmin GTN 625/635/650 Pilot’s GuideForewordGettingStartedAudio &Xpdr CtrlCom/NavFPLDirect-ToProcWpt InfoMapTrafficTerrainWeatherNearestServices/MusicUtilitiesSystemMessagesSymbolsAppendixIndex8. Touch the EFC key to display the keypad. Use the keypad andthe Enter key to select the Expect Further Clearance time fora reminder.9. Touch the Load Hold key to accept the hold parameters andreturn to the Direct-To page.Direct-To WptTouch To Activate Direct-To Course and HoldHold Pattern CourseSpecified CourseTo Direct-To WptFigure 5-13 Direct-To Page with Hold Selected10. Touch the Hold Activate key or press the small right knobto activate the selection.5.9 Direct-To a Search and Rescue PatternNOTE:This feature is available in software version 6.00 and later.A search and rescue pattern can be created as part of a Direct-To to a flightplan, off-route, or map waypoint. Creating a SAR pattern as part of an off-routeDirect-To will insert the SAR pattern waypoints at the end of the En Routeportion of the active flight plan.1. Press the Direct-To key to display the Direct-To page.Direct-To WptTouch To Load SelectedSAR Pattern To Direct-ToTouch To SelecticSpecific CourseFigure 5-14 Create SAR Pattern at Direct-To Waypoint2. Touch the SAR key. The Direct-To Search and Rescue Patternspage is displayed.
