15-10Garmin GTN 725/750 Pilot’s Guide 190-01007-03 Rev. DForewordGettingStartedAudio &Xpdr CtrlCom/NavFPLDirect-ToProcChartsWpt InfoMapTrafflcTerrainWeatherNearestServices/MusicUtilitiesSystemMessagesSymbolsAppendixIndex15.2 Flight TimersThe Flight Timers function provides count up/down timers, plus automaticrecording of departure time, and total trip time. Departure and total trip timerecording can be configured to run either any time unit power is on, or onlywhen your ground speed exceeds the in-air threshold set by the installer (forexample, 30 knots). A flexible Generic Timer is available for general timingneeds.NOTE: When a count up timer is used, the preset value has no function.1. While viewing the Utilities page, touch the Flight Timerskey.Departure Time(Local Time)SelectedCounterDirectionElapsedTimeStart/Stop Generic Timer Reset or Preset TimerSelect PresetTimeSet Departure TimeTo Current LocalTime Of Timer StartSelectCriteria ForTimer StartReset TimerFigure 15-11 Utility Flight Timers Page2. If the Generic Timer Direction counter is set to "Up," the ResetTimer key will be shown and when touched will return thetimer to 00:00:00. If the Direction counter is set to "Down,"the Preset Timer key will be shown and the key will return thetimer to the Preset time value.3. Touch each key as desired to set up timer operation.
