15-14Garmin GTN 725/750 Pilot’s Guide 190-01007-03 Rev. DForewordGettingStartedAudio &Xpdr CtrlCom/NavFPLDirect-ToProcChartsWpt InfoMapTrafflcTerrainWeatherNearestServices/MusicUtilitiesSystemMessagesSymbolsAppendixIndex15.4.1 Point-To-Point ModeThe Trip Planning Point-to-Point mode shows trip calculations between twoselected points: either two waypoints from the database or from your presentposition to a selected waypoint.1. While viewing the Utilities page, touch the Trip Planningkey.2. Touch the Mode key to toggle to Point-to-Point.3. Touch the P.POS key to toggle between using your presentposition as the From waypoint when selected or a waypointselected from the database when P.POS is deselected. If P.POSis selected, the Lat/Lon of the present position will be shownin the From position.Touch To SelectP-to-P or FlightPlan ModeTouch To UsePresent PositionAs DeparturePointTouch To SelectExpected AverageGround SpeedTouch To SelectDeparture TimeTouch To SelectDeparture DateLat/Lon Of PresentPosition Touch To SelectArrival WaypointTrip StatisticsFigure 15-14 Utility Trip Planning Page (Point-To-Point Mode)4. If P.POS is not selected for the From point, touch the Fromkey and then use the keypad to select a waypoint from thedatabase and touch Enter.
