Garmin GTR 225 Pilot's Manual
Also see for GTR 225: Installation manualInstallation manualSpecificationsPilot's guide
                                                | |
Contents
| 
2-4Garmin GTR 225/225A/225B Pilot’s Guide 190-01182-00 Rev. A2.2.4 Com Database Look-Up1. Press the CURSOR knob from the Com display to activate thedatabase look-up function.Identifier Field Activefor SelectionTurn LARGE KnobTo Move CursorTurn SMALL KnobTo Select CharacterFigure 2-5 Database Identifier Active for Selection2. Turn the SMALL knob to select characters and turn the LARGEknob to move the cursor.Selected IdentifierFigure 2-6 Database Identifier Selection3. After selecting the desired characters, press ENT. Turn theSMALL knob to scroll through the list of waypoint types.Waypoint Types with a “+” sign will have more frequenciesfor the same type. After selection, the selected waypoint andtype will be remembered for 30 minutes.Turn the SMALL Knob ToSelect Frequency TypeFigure 2-7 Database Waypoint Type Selection4. Press ENT to copy the frequency into the Standby frequencylocation. Press and release the FLIP/FLOP key to swap theActive and Standby frequencies.2.2.5 Emergency Channel1. Press and hold the FLIP/FLOP key or the Com Remote Transfer(COM RMT XFR) key for approximately two seconds. IFigure 2-8 Emergency Channel2. The Emergency Channel will be inserted into the ActiveFrequency position and the previous Active Frequency willbecome the Standby Frequency. |
Related manuals for Garmin GTR 225
manualsdatabase
Your AI-powered manual search engine