Garmin Gladiator TR-1 Owner's Manual
Also see for Gladiator TR-1: Installation and user manualInstallation setup manualOwner's manual
             | |
Contents | 
Installation of Basic LCD DisplayInstallation Overview:• Figure out where on your dash you want to mount the display, oroptional mounting panel. Be sure to allow plenty of room in theback of the display for mounting accessibility.• You will need good visibility and convenient reach of thedisplay.• Cut a 3-3/4” hole in the desired location.• Mount the display using the mounting hardware provided.• Make the proper wire connections to the ECU, the Handheld andto the rudder reference indicator (optional).• Turn the Gladiator autopilot system on with the deckmountOn/Off switch and verify display connections. The display shouldmomentarily light up all functions of the display, then show allOOO’s across the heading display and STBY will blink for 30seconds and then display STBY as the mode selection.• If the Rudder Position Indicator Transducer is used, it must beinstalled and calibrated before this mode will work correctly. Seepages 11 & 12 of this manual.Tools required:Electric Drill3.725 dia. hole saw5/16” open end wrenchSafety GlassesAdditional tools for Mounting Optional Panel:File for making additional clearances.75 dia. hole saw.156 or 5/32” drill bitPage 3 |
Related manuals for Garmin Gladiator TR-1
Garmin Gladiator TR-1 Owner's Manual
Garmin 30 Owner's Manual
Garmin GLADIATOR TR-1 Installation Setup Manual
Garmin GHC 20 Owner's Manual
Garmin GMI 20 Owner's Manual
Garmin GDL 30A Owner's Manual
Garmin GPSMAP 188C Owner's Manual
Garmin GNX Wind Owner's Manual
Garmin GPSMAP 198C Owner's Manual
Garmin STRIKER PLUS Owner's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine