iPhone® and iPod® SettingsWhen a compatible iPhone or iPod is connected tothe USB port of your Meteor device, you can playmedia and change options using the remote control.From the iPod source, select > iPod Settings.Repeat: Sets the repeat method for the track orplaylist.Shuffle: Sets the shuffle method for the tracks oralbum.Subtitles: Shows or hides subtitles.Artwork: Shows or hides album art on a connectedGarmin device.NOTE: Album art cannot be shown on theremote control.iPhone and iPod Search SettingsIf your iPhone or iPod contains more than 100artists, songs, or albums, you can enable a fastsearch to quickly navigate by letter or number.From the iPod source, select > iPod Settings >Searching.Off: The artist, song, and album lists are displayedusing the default layout.100-800: Displays lists using the fast search menuwhen your iPhone or iPod contains more than100 artists, songs or albums.MTP SettingsWhen a compatible MTP device, such as anAndroid™ smartphone, is connected to the USB portof your Meteor device, you can play media andchange options using the remote control.From the MTP source, select .Repeat: Sets the repeat method for the track orplaylist.Shuffle: Sets the shuffle method for the tracks oralbum.Artwork: Shows or hides album art on a connectedGarmin device.NOTE: Album art cannot be shown on theremote control.USB SettingsWhen a compatible USB flash drive is connected tothe USB port of your Meteor device, you can playmedia and change options using the remote control.From the USB source, select .Repeat: Sets the repeat method for the track orfolder.Shuffle: Sets the shuffle method for the tracks orfolder.Bluetooth SettingsWhen a compatible Bluetooth smartphone or mediaplayer is paired and connected to your Meteordevice, you can play media and change optionsusing the remote control.From the Bluetooth source, select .Discoverable: Allows the Meteor device to bediscovered by a Bluetooth smartphone or mediaplayer when pairing.Remove Device: Removes a saved pairedBluetooth smartphone or media player from theMeteor device.FM and AM SettingsIn addition to changing stations, you can manageyour preset stations using the remote control.From the FM or AM source, select > Presets.Save Current: Saves the currently playing station asa preset.Remove Preset: Allows you to remove one or allpreset stations from the device.General SettingsSelect .LCD: Sets the brightness and contrast.Power Save: Enables and disables the backlightpower-save feature.Key Sound: Enables and disables the sound.NMEA Monitor: Sets the data to view, the datadisplay cycle, and the units of measure for NMEA2000 data.Language: Sets the language on the remote.Tuner Region: Sets the region used by the FM orAM source.Tel Mute: Sets the behavior of the mute wire. Thedevice can either mute the audio or switch to theAux input when the optional mute wire isactivated.Set Device Name: Assigns a name to a connectedMeteor device.Stereo: Assigns the remote control to a connectedMeteor device.Update: Updates the remote control through aconnected Meteor device, or resets the remotecontrol to factory defaults.About: Shows the installed software version.Zone SettingsYou can adjust the settings for each available zoneusing the remote control. Each zone has differentsettings you can adjust.Select > Zone.Tone: Sets the bass, mid, and treble for all zones.Assign: Assigns the remote control to a single zoneor to all zones.Zone 1 SettingsSelect > Zone > Zone 1.Balance: Sets the left and right balance of the zone.Volume Limit: Sets the maximum volume for thezone.Set Zone Name: Assigns a name to the zone.Zone 2 SettingsSelect > Zone > Zone 2.Enable: Enables and disables the zone.Link to Zone 1: Enables zone 2 to use the samesettings as zone 1.Balance: Sets the left and right balance of the zone.Volume Limit: Sets the maximum volume for thezone.Set Zone Name: Assigns a name to the zone.Zone 3 SettingsSelect > Zone > Zone 3.Enable: Enables and disables the zone.Balance: Sets the left and right balance of the zone.Volume Limit: Sets the maximum volume for thezone.Subwoofer: Sets the output level of the subwooferand adjusts the frequency filter.Set Zone Name: Assigns a name to the zone.SpecificationsSpecification MeasurementNMEA 2000 Load Equivalency Number(LEN)3 (150 mA)