Getting StartedMontana 600 Series Owner’s Manual 1Getting Started WARNINGSee the Important Safety and ProductInformation guide in the productbox for product warnings and otherimportant information.When using your device the first time,you should complete these tasks to setup the device and get to know the basicfeatures.1. Install the batteries (page 2).2. Turn on the device (page 3).3. Register the device (page 3).4. Acquire satellites (page 3).5. Calibrate the compass (page 15).6. Mark a waypoint (page 6).7. Create a route (page 7).8. Record a track (page 10).9. Navigate to a destination (page 13).Device Overview➊➋➌ ➍➎ ➏➐ ➑➊ Camera lens (650 and 650t only)➋ Power key➌ microSD ™ card slot (page 40)➍ Auto mount power connector➎ Headphone jack (page 14)➏ Mini-USB port (under weather cap)➐ Battery cover D-ring➑ MCX port for GPS antenna (underweather cap)