Garmin Monterra Owner's Manual

Also see for Monterra: Quick start manual

Contents

Finding a Geocache with a chirp DeviceWhen you enable chirp searching, the device alerts you when itdetects nearby chirp devices. This is useful when searching forgeocaches that contain a chirp device.1 Select chirp.2 Select the toggle switch to enable chirp searching.3 Navigate to a geocache that contains a chirp device(page 6).When you are within 33 ft. (10 m) of the geocache thatcontains a chirp device, an alert appears on your device.4 Select Details to download and view information from thechirp device.5 If available, select Go to navigate to the next stage of thegeocache.ApplicationsInstalling ApplicationsBefore you can purchase or install applications on your device,you must add a Google™ account to your device (page 10).You can install additional applications from Google Play™.1 Select the Play Store icon.2 If necessary, follow the on-screen instructions to set up youraccount.Setting a Proximity AlarmProximity alarms alert you when you are within a specifiedrange of a particular location.1 Select Proximity Alarms > .2 Select a category.3 Select a location.4 Select Use.5 Enter a radius, and select Done.When you enter an area with a proximity alarm, the devicesounds a tone.Using the FlashlightNOTE: Using the flashlight can reduce battery life.Select Flashlight > .Calculating the Size of an Area1 Select Area Calculation > Start.2 Walk around the perimeter of the area you want to calculate.3 Select Calculate when finished.Satellite PageThe satellite page shows your current location, GPS accuracy,satellite locations, and signal strength.Changing the Satellite View1 Select Satellite > .2 If necessary, select Track Up to orient the satellite view withyour current track toward the top of the screen.3 If necessary, select Multicolor to assign a specific color tothe satellite and to the signal strength bar of that satellite.Listening to NOAA® Weather RadioYou can listen to National Oceanic and AtmosphericAdministration (NOAA) weather broadcasts using the NOAAradio built into your device. When the NOAA radio is receiving abroadcast, the device notifies you of weather alerts with apopup message and a notification.1 Pull up the weather cap from the headphone jack, andconnect wired headphones.The headphone wire acts as an antenna to receive thebroadcast. The radio does not function if headphones are notconnected.2 Select Weather Radio.3 Select an option:• To scan for the strongest broadcast automatically, selectAuto Scan.• To select a channel manually, disable auto scan, andselect and .• To switch between the built-in speaker and theheadphones, select .NOTE: The headphones must remain connected toreceive the broadcast.• To turn the audio broadcast on or off, select .The device continues to receive weather alerts when theaudio broadcast is disabled.• To turn off the radio, select .Turning off the radio disables both the broadcast andweather alerts.Listening to FM Radio1 Pull up the weather cap from the headphone jack, andconnect wired headphones.The headphone wire acts as an antenna to receive thebroadcast. The radio does not function if headphones are notconnected.2 Select FM Radio.3 Select an option:• To tune the next or previous available station, select or.• To tune a specific frequency, drag the tuner.• To add a preset frequency, select .• To tune a preset frequency, select the frequency.• To switch between the built-in speaker and theheadphones, select .NOTE: The headphones must remain connected toreceive the broadcast.• To turn off the radio, select .Viewing Weather DataBefore you can view the temperature you must pair your devicewith a tempe™ wireless temperature sensor (page 12).You can view weather data from the device sensors, includingthe temperature, UV index, barometric pressure, and ambientpressure.Select Weather.Customizing the DeviceAdding Shortcuts and Widgets to the HomeScreenYou can add application shortcuts and widgets to any of thehome screen pages. Widgets are tools that provide quickaccess to information, basic application functions, or devicesettings.1 From the home screen, swipe left or right to select a homescreen page.2 Select .Applications 7