• Select > Search Near to search near a recently foundlocation, another waypoint, your current location, or apoint on the map.3 Select a waypoint from the list.Editing a WaypointBefore you can edit a waypoint, you must create a waypoint.1 Select Waypoint Manager.2 Select a waypoint.3 Select an item to edit, such as the name.4 Enter the new information.Deleting a Waypoint1 Select Waypoint Manager.2 Select a waypoint.3 Select > Delete.Increasing the Accuracy of a Waypoint LocationYou can refine a waypoint location for more accuracy. Whenaveraging, the device takes several readings at the samelocation and uses the average value to provide more accuracy.1 Select Waypoint Manager.2 Select a waypoint.3 Select > Average Location.4 Move to the waypoint location.5 Select Start.6 Follow the on-screen instructions.7 When the confidence status bar reaches 100%, select Save.For best results, collect 4 to 8 samples for the waypoint, waitingat least 90 minutes between samples.Projecting a WaypointYou can create a new location by projecting the distance andbearing from a marked location to a new location.1 Select Waypoint Manager.2 Select a waypoint.3 Select > Project New Waypoint.4 Enter the bearing and distance.5 Select Save.Where To? MenuYou can use the Where To? menu to find a destination tonavigate to. Not all Where To? categories are available in allareas and maps.Optional MapsYou can use additional maps with the device, such as BirdsEyesatellite imagery, BlueChart® g2, and City Navigator® detailedmaps. Detailed maps may contain additional points of interest,such as restaurants or marine services. For more information,go to http://buy.garmin.com or contact your Garmin dealer.Finding a Location by NameYou can search for map POIs and saved items, such aswaypoints, tracks, or geocaches, by name.1 Select Where To? > .2 Enter the name or part of the name.3 Select a location from the search results.Finding a Location Near Another Location1 Select Where To? > > Search Near.2 Select an option.3 Select a location.Finding an AddressYou can use optional City Navigator maps to search foraddresses.1 Select Where To? > Addresses.2 Select the country or state, if necessary.3 Enter the city or postal code.NOTE: Not all map data provides postal code searching.4 Select the city.5 Enter the house number.6 Enter the street.RoutesA route is a sequence of waypoints or locations that leads youto your final destination.Creating a Route1 Select Route Planner > > .2 Select a category.3 Select the first point in the route.4 Select Use.5 Select to add additional points to the route.6 Select to save the route.Editing the Name of a Route1 Select Route Planner.2 Select a route.3 Select Name.4 Enter the new name.Viewing a Route on the Map1 Select Route Planner.2 Select a route.3 Swipe left to view the map.Editing a Route1 Select Route Planner.2 Select a route.3 Select an option:• To view a point on the map, select a point.• To change the order of points on the route, drag points upor down in the list.• To add an additional point to the route, select .• To remove a point from the route, hold the point, andselect .Deleting a Route1 Select Route Planner.2 Hold a route.3 Select .Viewing the Active Route1 While navigating a route, swipe down from the top of thescreen.2 Select .Reversing a Route1 Select Route Planner.2 Select a route.3 Select > Reverse Route.Waypoints, Routes, and Tracks 3