nüvi 800 Series Owner’s Manual Appendixbattery and then fully charge it. Do notunplug the nüvi until it is totally charged.You can also use the Suspend/Resumemode to put your nüvi in “sleep” modeand to quickly wake it up. With yournüvi powered on, slide the Power keyto the left. Operation is suspended.Slide the Power key to the left again toresume operation.To completely turn off your nüvi,remove the battery.Replacing the Battery in thenüviIf you need to replace the battery in thenüvi, use a Garmin lithium-ion battery010-10987-03. Purchase a replacementbattery at http://buy.garmin.com. Contactyour local waste disposal department forinformation about properly disposing ofthe battery.Replacing the Battery in theRemote ControlThe remote control contains a user-replaceable CR2032 battery.1. Use a coin to twist the covercounterclockwise until open.2. Insert theroundlithium coinCR2032battery intothe remotecontrol withthe positiveside facingup.3. Align the arrow on the battery coverwith the arrow on the outer edge ofthe remote.4. Use a coin to twist the coverclockwise until closed.nOTe: Contact your local wastedisposal department to properlydispose of batteries.Arrow onbattery coverBatterycoverArrow onouter edgeof remoteBatteryArrow onbattery coverBatterycoverArrow onouter edgeof remoteBattery