nüvi 800 Series Owner’s Manual AppendixMounting on YourDashboardUse the enclosed ounting disk to mountyour unit to the dashboard and complywith certain state regulations.CaUTiOn: The permanentmounting adhesive is extremelydifficult to remove after it is installed.1. Clean and dry the dashboard whereyou are placing the disk.2. Remove the backing from theadhesive on the bottom of the disk.3. Place the disk on the dashboard.4. Remove the clear plastic cover fromthe top of the disk.5. Place the suction cup mount on top ofthe disk. Flip the lever down (towardthe disk).Additional MapsYou can purchase additional MapSourcemap data from Garmin and load themaps in your nüvi internal memory or onan optional microSD card.To determine the versions of the mapsthat are loaded on your nüvi, open theMenu page. Touch Tools > Settings >Map > Map info. Checkwww.garmin.com/unlock/update.jsp tosee if an update for your map softwareis available. To enable additional maps,you need your unit ID (see page 44) andserial number (located near the powerconnector).To load maps, routes, or waypoints inyour nüvi memory or on your microSDcard, select the name for your nüvidrive or microSD card drive. Referto the MapSource Help file for moreinformation.