Garmin Personal Navigator GPS 48 Owner's Manual & Reference

Also see for Personal Navigator GPS 48: Declaration of conformity Supplementary guide Specifications

Garmin Personal Navigator GPS 48 Owner's Manual & Reference Manual pdf 48 page image

Active Route PageOnce a route has been activated, the active routepage will display the waypoint sequence of your routewith the estimated time enroute (ETE) at your presentspeed and the distance to each waypoint. As long as youare navigating an active route, the active route page willbecome part of the main page sequence of the unit. Theactive route page will also allow you to change the ‘ETE’field to display desired track (DTK) or estimated time ofarrival (ETA) for each leg. You can also clear or invertthe active route.To display DTK or ETA for each leg:1. Highlight ‘ETE’, and press E.2. Select ‘DTK’ or ‘ETA’, and press E.The active route page also allows you to clear (stopnavigating) or invert the active route without using theroute definition page.To invert a route from the active route page:1. Highlight ‘INV?’, and press E.To stop route navigation:1. Select ‘CLR?’, and press E.Copying and Clearing RoutesThe route definition page is also used to copy a routeto another route number. This feature is useful when youmake changes to the active (or TracBack) route and wantto save the route in its modified form for future use.To copy a route:1. Highlight the ‘route number’ field, and press E.2. Select the route number to be copied, and press E.3. Highlight the ‘COPY TO’ field, and press E.4. Scroll through the available routes and select a destina-tion route number. (Only open routes will be available.)Press E to copy the route.To clear a route from memory:1. Highlight the ‘ROUTE:’ field, and press E.2. Enter the route number, and press E.3. Select ‘CLR?’, and press E.4. Highlight ‘Yes?’, and press E.Active RoutePageREFERENCE44Active Route PageWhenever you have anactive route, the activeroute page will appear inthe primary pagesequence after theCompass/Highway Page.To copy a route, select anopen storage route andpress the ENTER key. Ifyou select a route that isalready used, you’ll bealerted with a ‘Route Full’message.