Garmin REACTOR Installation Instructions Manual

Contents

Garmin REACTOR Installation Instructions Manual Manual pdf 3 page image

You must calibrate the compass in the remote control beforeyou can use the gesture-controls feature. If the gesture-controlsfeature is not working properly after calibration, you can repeatthis process as often as needed.1 Select > Compass Calibration.2 Follow the on-screen instructions.Marking and Starting Navigation to a Man OverboardLocation1 Select MOBThe name and image of the MOB search pattern appear onthe screen.2 Select or to select the direction and begin following theMOB pattern.Sailboat FeaturesSailing-specific functions and patterns are available for theprogrammable keys when you connect your remote control to anautopilot on a sailboat.Activating a Wind Hold ActionBefore you can activate a wind hold, you must assign the windhold action to an action key (Changing the Functions of theAction Keys, page 2).1 Press the action key assigned to the wind hold action.The wind hold direction appears on the remote controlscreen.2 Press the action key again to activate wind hold.Tacking and GybingBefore you can activate a tack or gybe using the remote control,you must assign the tack and gybe action to an action key(Changing the Functions of the Action Keys, page 2).Before you can activate a tack or a gybe from heading hold (asopposed to wind hold), you must define the tack and gybe angleusing the helm control or chartplotter. See the owner's manualfor your helm control or chartplotter for more information.1 From heading hold or wind hold, select the action keyassigned to Tack/Gybe.2 Press or to tack or gybe to port or starboard.SettingsThese settings affect the remote control only. You must adjustthe helm control or chartplotter settings on the helm control orchartplotter.Press .Backlight: Adjusts the backlight level of the screen.Beeper: Sets if and when audible sounds are used.Compass Calibration: Calibrates the compass for the gesture-controls feature.Units: Sets the units of measure.Restore Defaults: Restores the remote control to factory defaultsettings.About: Shows information about the remote control.SpecificationsDimensions (W×H×D) 152 x 52 x 32 mm (6 x 2 x 11/4 in.)Weight 109 g (3.8 oz.) without batteriesMaterial Glass-filled nylonDisplay type Sunlight-visible, transflective memory-in-pixel(MIP)Display resolution R240 x 240 pixelsDisplay size (diameter) 30.2 mm (13/16 in.)Operating temperature From -15° to 70°C (5° to 158°F)Storage temperature From -40° to 85°C (-40° to 185°F)Battery type 2 AA (not included)Battery life 10 days, typical useRadio frequency 2.4 GHz @ 3.4 dBm nominalWater rating IEC 60529 IPX7*Compass-safe distance 15 cm ( 1 in.)*The device withstands incidental exposure to water of up to 1 mfor up to 30 min. For more information, go to www.garmin.com/waterrating.© 2018 Garmin Ltd. or its subsidiaries3

/ 4

Related manuals for Garmin REACTOR