Garmin RINO 700 Owner's Manual

Also see for RINO 700: Owner's manual

Contents

Garmin RINO 700 Owner's Manual Manual pdf 12 page image

5 Press the Thumb Stick controller.ProfilesA profile is a collection of settings that optimize your devicebased on how you are using it. For example, you can customizedifferent settings and views for when you are using the devicefor geocaching than when hiking or fishing. The default datafields and default pages change with each profile.When you are using a profile and you change settings such asdata fields or units of measurement, the changes are savedautomatically as part of the profile.Adding a ProfileThe device uses a recreational profile by default.From the home screen, select Setup > Profiles > CreateProfile.Selecting a ProfileYou must add profiles before you can select them (Adding aProfile, page 8).When you change activities, you can change the setup of thedevice by changing the profile.1 Select Profile Change.You may need to add this application to the home screenbefore you can select it (Adding an Application to the HomeScreen, page 7).2 Select a profile.Editing a Profile1 From the home screen, select Setup > Profiles.2 Select a profile.3 Select an option:• To change the name of the profile, select Edit Name.• To change the order of the profile in the list, select MoveUp or Move Down.• To delete the profile, select Delete.Custom Data Fields and DashboardsData fields display information about your location or otherspecified data. Dashboards are a custom grouping of data thatcan be helpful to a specific or general task, such as geocaching.Enabling the Map Data Fields or DashboardsYou can show a number of data fields or a type of dashboard onthe map.1 From the home screen, select Setup > Map > Data Fields.2 Select Large Data Field or Small Data Fields.3 Select an option:• Select the number of data fields to show on the map.• Select Custom, and select the number of data fields toshow when navigating and when not navigating.• Select Dashboard, and select the dashboard type.Customizing the Data FieldsBefore you can change the map data fields, you must enablethem (Enabling the Map Data Fields or Dashboards, page 8).You can customize the data fields and dashboards of the mapand compass pages.1 From the map or compass page, select > Change DataFields.2 Select a data field.3 Select a data field category and a data field.Adjusting the Backlight BrightnessYou can adjust the backlight brightness to maximize the batterylife. For a longer battery life, you should turn off the backlightwhen using the device in daylight.1 Select .2 Use the Thumb Stick to adjust the backlight brightness.Display SettingsFrom the home screen, select Setup > Display.Backlight Timeout: Sets the length of time before the backlightturns off.Adjust Contrast: Sets the contrast level of the display.Map SettingsFrom the home screen, select Setup > Map.Orientation: Adjusts how the map is shown on the page. TheNorth Up option shows north at the top of the page. TheTrack Up option shows your current direction of travel towardthe top of the page.Data Fields: Sets the dashboard or the number and type of datafields to display on the map. Each data field or dashboardshows different information about your route or your location.Marine Colors: Shades land and bodies of water for marineuse.Advanced Map SettingsFrom the home screen, select Setup > Map > AdvancedSetup.Auto Zoom: Enables the auto zoom when navigating.User Waypoint Zoom Level: Adjusts the zoom level at whichwaypoints appear. Waypoints do not appear when the mapzoom level is higher than the selected level.User Waypoint Text Size: Sets the text size for waypoints.System SettingsFrom the main menu, select Setup > System.Satellite System: Allows you to set the satellite system to GPS,GPS + GLONASS (About GPS and GLONASS, page 8), orDemo Mode (GPS off).WAAS/EGNOS: Sets the satellite system to Wide AreaAugmentation System/European Geostationary NavigationOverlay Service (WAAS/EGNOS). For more informationabout WAAS, go to www.garmin.com/aboutGPS/waas.html.Language: Sets the text language on the device.NOTE: Additional language files are removed from the devicewhen you select the language during the initial setup. Youcan download additional language files fromwww.garmin.com.Changing the text language does not change the language ofuser-entered data or map data.USB Mode: Sets the USB communication interface mode toMass Storage or Garmin. You should use the Garmin USBmode only when communicating with specific Garminapplications.About GPS and GLONASSThe default satellite system setting is GPS. You can use GPS +GLONASS for increased performance in challengingenvironments and faster position acquisition. Using GPS andGLONASS can reduce battery life more than GPS only.Setting the Device TonesYou can customize tones for messages, keys, turn warnings,and alarms.1 From the home screen, select Setup > Tones > Tones > On.8 Customizing the Device